OMARV V2000, 79" Severe Duty 3-Point Forestry Mulcher: Mulch & Grind To 8" Dia!

OMARV V2000 79" Tractor 3-Pt, PTO Powered Land Clearing Forestry Mulcher & Grinder With Swinging Hammer Blades!

• Severe Duty 540RPM Large Sump Gearbox Includes an Over-Running Clutch, Which Provides Two Advantages:
• First, Easy Alignment & Attachment of the PTO Shaft to the Tractors Output Shaft:
• O.R. Clutch Enables Free Spin of the PTO Shaft For Alignment!
• Second, Smooth Shut Down:
• O.R. Clutch Allows Mower Gearbox to Free-Wheel to a Stop, Eliminating Abrupt Shutdowns & Wear of the Tractors PTO Brake!
• 1000RPM Gearbox Available Separately.
• Heavy Duty Forged & Hardened Steel Hammer Blades Have 360° Swing:
• Swinging Hammer Blades Allow Some 'Kick-Back' For Providing Blade Protection When Contacting Boulders, Steel Posts, Or Other 'Non-Vegetation' Fixed Objects.
• If Your Ground Is Reasonably Free From Fixed Objects (Boulders, Steel Posts, etc.), Then Consider Our Fixed Tooth Model Which Will Provide More Aggressive Land Clearing Mulching With Better Ground Speeds.
• Hydraulically Operated Mulching Door Can Be Operated 'On-The-Fly' To Coordinate Ground Speed & Desired Results In Varied Demands:
• Extra Large 9" Dia. Rear Roller Can Be Used For Cutting Height Adjustment Also 'On-The-Fly'!
• Open, Close & Full Travel Function Of Rear Mulching Door Also 'On-The-Fly':
• Fully Open To Drive Back Over Material To Mulch, Stuffing Material Into The Mulcher, Grinder.
• Then Closed (Full or Partially While Driving Forward) If Further Reduction Of Material Is Desired.
• Rear Roller Can Provide 2" to 4" Of Working Height Adjustment Via Adjustable Positions & Radius Of Travel.
• Double Skinned Mulcher w/Each Deck At 5/16" Thick!
• Double Under Deck Mulching Counter Blade Captures & Further Reduces Material.
• Extra Wide Single Position Bolt-On Skid Shoes Provide Support On Softest Grounds While Allowing Mulching & Grinding Activity To Be Flush To Grade!
• Skid Shoes & All Working Contact Parts Made with Abrasion Resistant Steel!
• Front & Rear Radiused Skid Shoes For Contact with Stumps & Prevention of Material Accumulation.
• Double Sets of Pull Arm Pin Holes:
• Top Holes Are Standard Pin Diameter. Use Pull Arm Draft Control Or Maintain A Desired Elevation To Follow Tractors Pull Arm Position.
• Bottom Vertically Oval Pin Holes Allows Mulcher To Follow Terrain With About 4" Of Float At The Pull Arms.
• Push Bars Forward Pitch Has Infinite Adjustment Via Turnbuckle.
• Grade To Top Of Push Bar is 70" With Pitch As Shown In Photos.
• Double Row Of Heavy Duty Front Chain Guards.
• The Configuration Of This Mulcher/Grinder Allows For Multiple Efficient Applications:
• Land Clearing & Mulching Of Large, Dense & Heavy Stands Of Vegetation.
• Drive Over Stump Grinding.
• With Rear Roller, This Mulcher Grinder Can Also Be Used As A Super Duty Flail Mower.
• Mulcher Ships Complete & Assembled With 540RPM PTO Shaft, Hydraulic Hoses & Tips!
• Sample Photos Show Mulcher on a Tractor - Tractor NOT Included!

• Suitable for 85-150HP Tractors.
• Cat 2, 3-Point Hitch.
• Working Width: 79".
• Overall Width: 97".
• Mulches Up To 8" Diameter!
• Min. 120-130hp Required for Max. Mulching Capacity.
• Severe Duty Computer Balanced Rotor is Highly Populated with 34 Forged & Hardened 360° Swinging Hammer Blades:
• Rotor Diameter is 7"!
• Blade Tip To Blade Tip Dia. Is 20"!
• Rotor Speed is 2550RPM's!
• Weight: 2,790lb's.
• Specifications are based on manufacturer provided data & subject to change.