Peruzzo EX51, 51" HD Excavator Flail Mower: 15-30GPM, Cut 3" Dia Material

Peruzzo EX51, 51" Excavator Flail Mower, Shredder, Mulcher with Swinging Blades!

• This Peruzzo Flail Mower Has 60 Larger, Swinging Blades:
• Peruzzo Flail Mowers Are Always Highly-Populated With Blades to Provide the Best Possible Cut & Reduce the Burden on Your Excavator!
• Swinging Blades Will Last Longer & Be More Efficient During Operation By Reducing The Demand Back to Your Excavators Hydraulic System - Very Important On Smaller Excavators With Limited Hydraulic Capacity!
• Triple 'Y' Blades Provide Universal Results From Cutting Grass, To Mulching Up To 3" Diameter Material.
• Direct-Drive Hydraulic Motor Eliminates Drive Belts, Reducing Wear Parts & Down Time, and Provides Better Power Transfer!
• With An Anti-Cavitation Valve As A Standard Feature, Not Only Are Abrupt Hydraulic Shutdowns Eliminated, But The Need For A Case Drain Is Also Eliminated (For Standard Flow Applications Up To 28GPM) & A Longer Hyd. Motor Life Can Be Expected Too!
• Hydraulic Systems With 28GPM & Higher Require A Case Drain!
• Bi-Directional Flail Rotor Has Advantage Of Left to Right Dynamic Sweeping & Using Both Sides Of Blades w/o Flipping Them!
• Sample Photos Are Of The EX42 Flail Deck, But This Listing Is For The EX51, As Noted!
• Sample Photos Show Excavator For Reference Only - The Excavator Is Obviously Not Included!
• Sample Flail Mower Photos Shown with Cat Pin Grabber Coupler.
• Ships Complete with Excavator Coupler, Hydraulic Hoses & Hydraulic Couplers - Excavator Coupler Style & Hose Length MUST Be Specified!

• Suitable for:
• 15 - 30GPM Hyd. Systems @ Max. 3625PSI.
• 5 to 10 Ton Excavators.
• Cutting Width: 51".
• Overall Dimensions: 67" Wide X 36" Deep X 21" Tall.
• Max. Mulching Capacity: 3" Diameter.
• 20 Blade Holders for a Total of 60 Cutter Blades.
• Deck Thickness: 1/4".
• Side Plate Thickness: 3/8".
• Rotor Speed is 3000 RPM.
• Rotor Tube Thickness: 1/2".
• Rotor Tube Diameter is 6-1/4".
• Blade Speed is 185 MPH.
• Triple 'Y' Blades Are 8mm Thick Each.
• Working Diameter, 'Blade Tip to Blade Tip' is 19".
• Built-In Relief Valve Provides System Protection.
• Weight: 1,070lb's (Less Excavator Coupler & Hoses).
• Specifications are based on manufacturer provided data & subject to change.