Peruzzo Terex 7" Wood Chipper, 3-Point PTO: Hyd Roller Feed, Speed Sensor

Peruzzo Terex, Conveyored Hydraulic Roller Feeding, 3-Point PTO Powered Wood Chipper with Speed Sensing Control!

• The Hydraulic Roller Power Feed Feature Will Force Feed Material Into The Cutting Chamber & Includes 'Automatic Speed Sensing Feed Rate Speed Adjustment' For Maximum Performance Efficiency!
• Also, Instead of a Bottom Roller (which Supplements the Top Power Roller), This Terex Chipper Uses A 'Cleated Conveyor', Providing a More Robust Feed While Minimizing the Need to Contact the Rear Rollers with Material Being Fed, Accommodating the Chipping of a Much Wider Range of Vegetation!
• This Chipper is Also Hydraulically Self-Contained, and Does Not Require Hydraulic Outlet Power From The Tractor!
• Chipper has 4, Hardened Tool Steel, Presharpened Rotor Blades and 1 Anvil Blade.
• Hour Meter is Standard!
• Multi-Pin Tractor Style Electrical Connector is Standard.
• Videos of Other Chippers Always Show Chipping of Straight Limbs & Branches - But the Video in this Listing Shows the Aggressive & Robust Feeding & Chipping Action of This Machine with Very Crooked & Serpentine Shaped Limbs & Branches - This Universal & Dynamic Feeding System is Unsurpassed!
• Powder Coated Paint!
• Chipper Ships Complete Including:
• 540RPM, Shearbolt Protected PTO Shaft.
• Hydraulic Controls & Hoses.
• Safety Shut-Off Bar with Forward & Reverse Functions.
• Clear Hopper Opening Apron For Safety & Visibility.

• Rated for 35-100HP Tractors.
• This Terex Chipper Will Chip Up To 7" Diameter Material: All Soft & Hardwood Trees, Bamboo, Palm Fronds, Vines, Yucca, Etc.!
• PTO Power Transfers to the Flywheel via a Belt Drive System to Provide 1000RPM's of Aggressive Flywheel Rotation!
• 3-Point Hitch is Cat 1 & 2, Clevis Style!
• Bushings Required for Cat 2 Applications.
• Overall Dimensions w/Hopper Folded are 65"L x 43"W x 100"H.
• 100" Height is to Top of Discharge Deflector as Shown in Photos.
• Throat Opening is 9-1/2" Wide x 17" Tall.
• Cleated Conveyor Width is 9-1/2" & Extends 9" In Front Of Top Roller.
• Cleated Roller is 8" Diameter.
• Hinged Feed Table Length is 33-1/2" x 36" Wide.
• Stationary Feed Table Section, Between Hinge & Throat Opening is 25-1/2".
• Feed Table is 24" Above Grade in Open Position.
• Feed Hopper Opening is 34" X 34".
• Rotor Dimensions are 1-3/16" Thick x 24-1/2" Diameter & Weighs 197lb's.
• Discharge Chute Rotates 360° Continuously.
• Discharge Chute is Complimented with an Adjustable Deflector Tip.
• Weight: 1,166lb's (Less PTO Shaft, Pallet/Crating, etc.).
• Specifications are based on manufacturer provided data & subject to change.