Peruzzo SS190 SkidLoader Flail Mower, Mulcher w/Roller: Direct Drive, High Flow, 75" Cut

Peruzzo SS190 Skid Steer Mulcher, Flail Mower With Rear Roller For 25 to 45GPM High Flow Hydraulic Systems.

• Direct Drive Hydraulic Power & Unique Flail Blade Configuration Makes This Peruzzo SS190 The Most Aggressive & Trouble Free Skidsteer Flail Mower Available!
• Yes, Direct Drive Means NO Belts, NO Belt Failures, NO Power Loss Thru Belted Systems!
• Skidsteer Case Drain is Required!
• Pre-Drilled Deck Holes Accommodate Repositioning Mounting Plate for Left or Right (14") Offsetting!
• Rear Roller is Standard:
• Shown in Last Photo.
• Some Photos Shown with 'Optional' Hardox Bolt-On Skid Shoes.
• Large Plated Side Guard is Standard!
• Video Shows The 'Standard Flow' Mower at Work!
• Results in Sample Photos are from 'Standard Flow' Mower!
• Skidsteer Not Included - Shown for Reference Only!
• Mower Includes Hydraulic Hoses & Couplers w/Spiral Guard as Shown!
• Coupler Size Must Be Identified.

• Aggressively Cuts & Chews 4" Diameter Material with Higher Hydraulic Flow & PSI:
• Performance subject to Skidsteers Hydraulic Capacity & Type of Vegetation.
• For Maximum Performance, Skidsteer Must Have 32 to 45GPM.

• Mowing Width: 75".
• Overall Width: 87".
• Overall Depth: 31".
• Overall Deck Height: 23".
• Suitable for 25-45GPM Hyd. Flow Rate @ Min 3000-Max 4500PSI.
• Max Rotor Speed 3000RPM's.
• Rotor Diameter is 7" with 28 Sets of Triple 'Y' Blades.
• Blade Tip to Blade Tip Diameter is 19".
• Mower Deck is 3/8" Thick.
• Mower Weight: 1,468lb's (Less Pallet/Crating, etc.).
• Specifications are based on manufacturer provided data & subject to change.