Peruzzo SS190 75" DIRECT DRIVE Skid Steer Flail Mower: Cut 4" Dia, 40GPM, Offsetable

Peruzzo SS190 Skid Steer Flail Mower For 25 to 40GPM High Flow Hydraulic Systems.

• Direct Drive Hyd Power & Unique Flail Blade Configuration Makes This Peruzzo SS190 The Most Aggressive & Trouble Free Skidsteer Flail Mower Available!
• Yes, Direct Drive Means NO Belts, NO Belt Failures, NO Power Loss Thru Belted Systems!
• Skidsteer Case Drain is Required!
• Pre-Drilled Deck Holes Accommodate Repositioning SS Mounting Plate for Left or Right (14") Offsetting!
• Replaceable Hardox Bolt-On Skid Shoes.
• Photos on John Deere & CAT S.S. Shows the New, Standard Larger Side Guard & Hose Holder.
• Video is the Standard Flow Mower at Work!
• Results in Sample Photo Is From Standard Flow Unit!
• Skidsteer(s) Are Not Included - Shown for Reference Only!
• Mower Includes Hyd Hoses & Couplers!
• Coupler Size Must Be Identified.
• Optional Rear Roller Available At Additional Cost:
• Shown in last photo.

• Aggressively Cuts & Chews 4" Diameter Material with Higher Hydraulic Flow & PSI:
• Performance subject to Skidsteers Hydraulic Capacity & Type of Vegetation.
• For Maximum Performance, Skidsteer Must Have 32 to 40GPM.

• Cutting Width: 75".
• Overall Width: 87".
• Overall Depth: 32".
• Overall Deck Height: 24".
• Suitable for 25-40GPM Hyd. Flow Rate @ Minimum 3000PSI.
• Max Rotor Speed 3000RPM's.
• Rotor Diameter is 7" with 28 Sets of Triple 'Y' Blades.
• Blade Tip to Blade Tip Diameter is 19".
• Mower Deck is 3/8" Thick.
• Mower Weight: 1,468lb's (Less Pallet/Crating, etc.).
• Specifications are based on manufacturer provided data & subject to change.